Detailed Description
Hytera's E-pack200 repeater is intended for fast and flexible communication system deployment. The highly portable E-pack200 can not only be used as a radio to make and receive calls, it can also create a wireless mobile Ad Hoc network for voice routing. One E-pack200 can function as a radio, repeater, and mesh node with one frequency, greatly saving frequency resources.
There are two versions of the E-pack200 repeater available, the VHF version or the UHF version. The custom operating frequencies are VHF 136- 174Mhz & UHF 400-470 MHz pre-set frequency range, allowing efficient usage of channel resources.
- Frequency
- 400-470 MHz
- 136-174 MHz
- Protocol
- DMR conventional (Tier II)
- Networking capacity
- 31
- Channel spacing
- 12.5 kHz
- Rated voltage
- 14.8 V DC
- Current consumption
- < 1 A (standby)
- < 2.5 A (at 20W transmit power)
- Battery capacity (optional)
- 148 Wh
- Charging time
- Rapid charge 2h 80%; 3h fully charged
- Battery life
- About 9 hours (15–85 duty cycle)
- Frequency stability
- ±0.5 ppm
- Antenna impedance
- 50 Ω
- Dimensions (H x W x D) in mm
- 211 x 62 x 235
- Weight
- 3.1 kg (with battery)
Features & Benefits
- Frequency
- 400-470 MHz
- 136-174 MHz
- Protocol
- DMR conventional (Tier II)
- Networking capacity
- 31
- Channel spacing
- 12.5 kHz
- Rated voltage
- 14.8 V DC
- Current consumption
- < 1 A (standby)
- < 2.5 A (at 20W transmit power)
- Battery capacity (optional)
- 148 Wh
- Charging time
- Rapid charge 2h 80%; 3h fully charged
- Battery life
- About 9 hours (15–85 duty cycle)
- Frequency stability
- ±0.5 ppm
- Antenna impedance
- 50 Ω
- Dimensions (H x W x D) in mm
- 211 x 62 x 235
- Weight
- 3.1 kg (with battery)
Receiver
- Static Rx sensitivity
- -122 dBm @ 5% BER
- Adjacent channel selectivity
- ETSI: 60 dB @12.5 kHz / 70 dB @25 kHz
- Intermodulation response rejection
- ≥ 70 dB
- Spurious response rejection
- ≥ 70 dB
- Blocking
- 84 dB
- Conducted spurious emission
- -57 dBm (at 9 kHz to 1 GHz)
- -47 dBm (at 1 GHz to 12.75 GHz)
Transmitter
- Output power
- 1W / 5W / 10W (per way)
- Adjacent channel power
- 60 dB @12.5 kHz
- 70 dB @25 kHz
- Vocoder type
- AMBE+2™/NVOC
Environmental
- Operating temperature
- -30°C to +60°C
- Storage temperature
- -40°C to +85°C
- ESD
- IEC 61000-4-2 (level 4)
- ±8 kV (contact discharge)
- ±15 kV (air discharge)
- Waterproof & Dustproof
- IP67
- Shock and Vibration
- MIL-STD-810 C/D/E/F/G
- Humidity
- MIL-STD-810 C/D/E/F/G
Location Service
- GNSS
- GPS
- TTFF (time to first fix) cold start
- < 1 minute
- TTFF (time to first fix) hot start
- < 10 seconds
- Horizontal position accuracy
- < 10 meters
- Note
- Suitable for long-term tracking (5 satellites visible at the rated signal strength of -130 dBm)
Technical Specification
Type
Repeaters